1. Before use, the yellow-green two-color wire in the power core wire should be grounded to prevent the danger of electric shock caused by electric leakage.

2. Lift the front end so that the water filling port is upward, and slowly pour the boiled water from the water filling port with the measuring cup. The amount of water to be added depends on the volume of the iron's water reservoir.

3. For electric irons equipped with water level glass, you can stand the iron upright, observe the water level in the water reservoir, and add water as needed.

4. On the fabric sign of the steam iron, the label of the fabric name is basically the same as that of the temperature-regulated electric iron. The difference is an additional "Steam" tag.

5. Connect the electric iron to the power supply, turn the temperature control knob to the position between the "wool" and "linen" gears, and the indicator light should light up. When the light goes out, the soleplate temperature has reached the desired value. If the iron has been filled with water, there should be steam coming out, ready for ironing.

6. Dry ironing can be done with a steam iron. The method is to adjust the temperature control knob to select the appropriate soleplate temperature according to the type of fabric being ironed. After that, adjust the steam knob to the "0" position.

7. After use, the remaining water in the water reservoir should be poured out from the water inlet. When pouring, the front end of the iron should be facing down, and the electric trading bucket should be shaken at the same time, and the water can be poured out. Then adjust the temperature knob to the highest temperature file, and turn on the power for a few minutes to evaporate all the internal water. Then cut off the power, turn the temperature control knob back to the lowest temperature, and store it after natural cooling.

WJ-600H 优质不锈钢轻按开关手柄温控器全蒸汽熨斗/蒸汽压力机